Slim Profile Drive Bolt
1
1
Designed for smaller gate frames – up to 50mm wide with a 50/130mm travel length
1
1
Plate
The Slim Drive Bolt is designed for gates with frames of less than 50mm and has a 50/130 travel length.
The Drive Bolt ensures secure locking, even in the event of high winds or attempted forced entry.
- 24V DC operation to allow wiring directly to the control panel outputs
- sequencing with the gate through the control panel is automated to allow a four second delay after operation of the drive bolt to allow the gate to open
- can be used to lock the gate in the open or closed positions (optional)
- 25mm stainless steel (option of 40mm shaft)
- 50-130mm travel
- Unique override system will not allow the pin to jam and overload if the pin doesn’t line up with the hole
Dimensions
